The Basics of Fiber Optic Installation
One of the reasons why more and more people prefer to get fiber optic cables is the fact that they are just very easy to install. In the past, if you want to establish some sort of connection, you have to deal with complicated and heavy cabling. Fortunately, fiber optic cables have come into the picture being the easiest to install and the lightest and most flexible cable there is. If you look at the process of installing fiber optic cables and that of other wire cables, they are more or less the same. And yet, when it comes to the tools, method, and instruments used, they are never the same.
There are different ways of installing fiber optic cables. These cables can actually be installed for either indoor underwater purposes or outdoor underground purposes. With the many cables and applications for fiber optics, you cannot pinpoint only one process of its installation. And yet, there are still general rules that must be applied when it comes to getting these cables and other types of cables installed the right way. To discover more about these guidelines, make sure to view here for more. Despite the fact that data cable installations and network cable installations are best done by the professionals, it will be to your advantage if you know even some basics about the entire process.
Site survey: In any type of network cable installation, this must be the first step so that the professional will be able to assess the location better as well as its special needs. Surveying the site helps in finding out about the surrounding environmental and physical hazards. Coming up with a plan on how machinery must be placed as well as the routes of the cable can only be made possible by doing this first. This plan is very much essential for installing fiber optic cables in spas and pools.
Cable stretching plan: When deciding to have fiber optic cables installed or any cables for that matter, their access point and junction locations, splice setting, and cable pulling equipment requirements must all be figured out firsthand. For lightning protection, have a complete system prepared with the right fiber type from the side glow one to the end glow one.
Avoid twisting cables and exceed its bend radius: You can expect lower efficiency for your fibers if you will be putting a lot of stress in them such as twisting them. See to it that you do not practice this one when you are applying your cables for lightning. In addition, avoid exceeding the bend radius of your fiber optics cables or else they will be broken. With your bend radius, it should be twenty times smaller than the diameter that you have for your cable. Also, do not forget to have its final installation bend in comparison to the diameter to be ten times smaller for your cable.